一个非常好用的免费屏幕捕获软件，下载和安装Screenshot Captor后，它必须激活。注册一个免费帐户，你就将会得到一个激活密钥。Screenshot Captor可以使用不同的方式来捕获屏幕，如图下：
Wireless Router Home Automation
Lua sleep function in milliseconds
Lua Socekt must be use in order to call sleep function in milliseconds.
An example to install Lua Socket to OpenWRT
opkg install luasocket
An example to sleep 10 milliseconds
Lua can only sleep/wait in seconds (not milliseconds) without install Lua Socket. Code below shows the sleep funciton.
delay = delay or 1
local time_to = os.time() + delay
while os.time() < time_to do end
Example to sleep 5 seconds
D-LINK DNS-320 Firmware Upgrade from 2.00 to 2.02
- dns320_FW-202 dated 2011/11/23: ftp://ftp.dlink.com/Multimedia/dns320/Firmware/
- You can also download the beta version dated 2012/03/30, but I didn't test it.
OpenWRT in Client Mode
Fun_plug 0.7 on D-LINK DNS-320 ShareCenter
- D-LINK DNS-320 ShareCenter
- Hard Disk Configure as Volume_1: Standard as shown in figure below
TP-LINK TL-WR1043ND Router + Web Cam = IP Cam
- A working OpenWRT on TP-LINK TL-WR1043ND Router
- Web Camera. I'm using Microsoft LifeCam HD-5000
OpenWRT in VirtualBox
If you are considering to test OpenWRT without a router or you don’t want to flash the router firmware over and over again. Here is the right place for you.
OpenWRT in VirtualBox is an image file run in VirtualBox. By the time I write this article, the VirtualBox & OpenWRT image version are Ver 4.1.20 and 10.03.1 respectively.
TP-LINK TL-WR1043ND router as a Samba File Server
Samba is a free software re-implementation of the SMB/CIFS networking protocol, Samba provides file and print services for various Microsoft Windows clients.
First, this assumes that you already have OpenWRT installed. Read this article if you haven't upgrade firmware to OpenWRT.
Second, you must have a working USB flash drive attach to router. Read here for installing USB flash drive.