Friday, 24 May 2013 21:09
Arduino PCB DIY
If your projects require many Arduino and you do not want to purchase the expensive full set of Arduino, here is the good place to go.
All the PCB design is single sided I sugggested to use toner transfer to make the PCB. You should Google "toner transfer" if you want to know more about it.
I should mention all the collection of PCB is not my own design, all credit goes to each respective authors.
Nanino– the DIY friendly Arduino
This is the one that I always use for my projects. The two 1K resistors & two LED can be omitted. Two design is available, the bigger design come with prototype area.
This is the one that I always use for my projects. The two 1K resistors & two LED can be omitted. Two design is available, the bigger design come with prototype area.
Really Bare Bones Board (RBBB)
Designed by Modern Device, this board is very small. The PCB file come with PDF and Eagle PCB design
DIYDuino
Download DIYDuino
EDuino
You will find the assembly of the components in the EDuino boards a bit uncommon; most of them are mounted SMD-like, although they are through-hole components. In the files you’ll find PDF files with schematic, PCB board, silkscreen and component placements.
SunDuino
Arduino Single-Sided Serial Board (version 3)
The PCB design come with serial interface and require Eagle PCB to open it. This file is available at Arduino official website.
Arduino Single-Sided Board with FTDI header
The PCB design come with FTDI header and require Eagle PCB to open it. This file is available at OpenEnergyMonitor.
YABBAS - Yet Another Bare Bones Arduino (on Stripboard)
Arduino 28 Pin Labels
Arduino ATMega Sticker
Published in
Blog
Tagged under
