Saturday, 11 August 2012 14:02

AppServ Web Server

Before reading this article, you may want to know EasyPHP web server that I setup previously, please refer this page http://diy2u.weebly.com/1/post/2012/07/winxp-easyphp-web-server.html.

 
I'm installing Apserv web server today (11/08/12) due to EasyPHP web server did not display any image slide from my computer.
 
I tested 4 different versions of EasyPHP from EasyPHP-5.3.9 to the latest EASYPHP 12.0, and also tested with different browsers, but I had no luck to make it work. 
 
I confirmed that it is not the Joomla problem, because the same webpages can run on my website (the webpages that you are seeing now). I suspected it must be something wrong with the library settings or the EasyPHP configuration, but I don't want to spend too much of time to figure it out.
Sunday, 29 July 2012 11:04

Control Arduino via PHP (EasyPHP)

The Arduino Duemilanove (not Arduino Uno) is control by a computer over the network or internet via PHP. This article assumed that you already install WAMP web server & Arduino driver in your computer.

My Arduino Duemilanove is connecting to the USB port of my computer, the USB serial com port is detected as COM4.

Sunday, 29 July 2012 10:55

EasyPHP Web Server (WinXP)

WampServer is my favorite personal local web server before my Sony Vios notebook get spoil. Now I switch to EasyPHP due to WampServer is not running on my new Toshiba notebook.

I had do a research before I stick into one particular web server software, here you can get some web server information. After study some post from internet & tested myself. Finally EasyPHP is my choice.

 

EasyPHP is a wonderful WAMP server application. With EasyPHP, you will have PHP,   MySQL , Apache,  PhpMyAdmin, Xdebug on your computer.   

I start using EasyPHP from version 5.3.9. Now it is EASYPHP 12.0 and there is three different PHP version including in EASYPHP 12.0:

Original project is on http://www.circuitcellar.com/avr2006/winners/AT3296.htm published in AVR contest 06 by Steven Savage. But the link is not available any more. 

The interface plugs into a PS2 keyboard port on the PC and accepts commands from the infrared remote. I'm using an ordinary DVD remote (38KHz) to control my computer.   


The original schematic is not correct, I had make the correction for PC Data & PC Clock of SV1.
Source Code and Compliled Hex file: infra-red ps2 keybard atir.zip
Sunday, 29 July 2012 09:57

Run Android 2.3 on VirtualBox

This guide is based on Android 2.3 (Gingerbread)  & VirtualBox 4.1.8 running on Microsoft Windows XP.

I choose Android 2.3 because I own a Samsung GALAXY Y (S5360) hand phone which preloaded with Android 2.3. I always test the applications on my computer before I download to the hand phone.

Back to Top