Blog
Saturday, 20 August 2016 17:49

Makeblock 3-in-1 mBot Ranger Robot Kit

Makeblock 3 in 1 mBot Ranger Robot Kit is a three-in-one STEM (Science, Technology, Engineering & Mathematics) Educational robot kit which offers the ability to create a Robot Tank, Three-Wheeled Racing Car and a Self-Balance Car. You can program and control the mBot Ranger via iPad, tablets or laptop.

I get my mBot Ranger Robot Kit from GearBest, the price of the kit is $134.87.

Published in Blog

This is an Arduino based digital Clock to display real time on a 32x16 LED matrix panel using a DS1307 RTC module. The date and time can be set via serial interface or push button switches.

Published in Projects
Wednesday, 20 April 2016 23:41

Arduino based LCD Digital Clock

This is an Arduino based digital Clock to display real time on a 16x2 LCD using a DS1307RTC module. The date and time can be set via serial interface or push button switches.

Published in Projects

I'm not a Smartphone addict, I never interested in the features of Smartphone or which Smartphone is best for me. However, as a DIY enthusiast, the Seeedstudio RePhone catches my eye.

The open source hardware manufacturer (SeeedStudio) published the world's first open source, modular Smartphone (RePhone) in Kickstarter on September 23, 2015. RePhone is a GSM +BLE (Bluetooth Low Energy) phone, future version will support 4G LTE. I own a RePhone DIY Kit from Gearbest.

Updated on 23 Mar 2016
Gearbest currently running a flash sale on electrical & tools, you can buy it for cheaper than the creator(Seeedstudio).
http://www.gearbest.com/promotion-electrical-amp-tools-special-480.html

Published in Blog
Tuesday, 29 December 2015 20:44

DIY 8x8x8 RGB LED cube

DIY 8x8x8 RGB LED cube

Thank you my friend Siew Goh Chuang, he made this beautiful LED cube:  This is a 8x8x8 RGB LED cube project, a modified version of the LED cube which originally designed by Kavindarrah. This project only modified the hardware but leaving the software (source code) intact. All the source code is available in Kavindarrah's website.

Published in Projects
Saturday, 12 December 2015 22:29

NEJE DK-5 Pro-5 500mW Laser Engraver/Cutter

NEJE DK 5 Pro 5 500mW Laser Engraver Cutter

NEJE DK-5 Pro-5 is a laser engraver/cutter which can be used to engrave various materials such as hard wood, plastic, bamboo, rubber, leather, cut paper and so on. You can buy it from Gearbest.

Published in Blog

ESP 07 Arduino IDE
The ESP-07/ESP-12 is a generic ESP8266 module which have no bootstapping resistors on board, insufficient decoupling capacitors, no reset circuit, and no USB-serial adapter. This is an article shows you how to connect the bootstapping resistor to the ESP-07 module and upload sketches onto the ESP-07/ESP-12 using the familiar Arduino IDE.

Published in Blog

Wi Fi controlled Remote Control Car without microcontroller

这是一个具有摄像功能的Wi-Fi无线遥控小车,设计独特,它使用了一个无线路由器,无需外加微控制器亦可以通过电机驱动器进行遥控小车。

 

Published in 电子与电脑

Wi Fi controlled Remote Control Car without microcontroller

This is a Wi-Fi controlled remote control car with camera that can be driven over the internet. The RC car is very unique since it's using a wireless router and eliminate the need of a microcontroller.

Published in Projects
Tuesday, 29 September 2015 17:22

L298N Motor Driver Controller Board

L298N Motor Driver Controller Board

A guide on how to use the L298N Motor Driver Controller Board, this is a dual motor controller board that allow you to control the direction & speed of two DC motors or one stepper motor.

The L298N Motor Driver Controller Board is a very low cost module, there are several design variants available on the market, mine get from GEARBEST.

Published in Blog
Page 1 of 5